KRC 70

lorem ipsum dolor sit

KRC 70 Ramp Car is a 7-section folding ramp for loading/unloading MOW work equipment train.

ktr450 tie replacer

The ramp car has a total working length (not including grade on the car) of 70 feet; this translates to 5.3% grade.

Technical Specs

  • Length-work
    70’-0” (21.3 M)
  • length-travel
    16’-5” (12.2 M)
  • Height
    12’-0” (3.7 M)
  • Weight
    22,000 lbs. (9980KG)

Machine Description

Knox Kershaw’s KRC 70 Ramp Car is a 7-section folding ramp for loading/unloading MOW work equipment trains. Theramp car has a total working length (not including grade on the car) of 70 feet; this translates to 5.3% grade. The foldingmechanism is controlled by the cylinder rod positions for reliable sequencing.

Power Unit:
Standard package is a Deutz, 2-cylinderdiesel, 30 hp, oil-cooled. 12V DC negative ground. Engine alternator charged.Fuel: 20 gal. (76 L), Hydraulic: 40 gal. (151 L)
Construction:
Welded construction gradetubular steel. Rail tread made of wear resistant steel.Heavy-duty aggressive rubber tire tread. Section jointsare reinforced with bushings to extend service life.
Winch:
Standard two-speed hydraulic winch with 5/8 inch (16 mm) wire rope. An optional secondary winch assists operators in deploying the primary wire rope.
Hydraulic System
A direct-drive gear pump powers the ramp and winch circuits. All hydraulic components are filter protected. The ramp and winch can be controlled with a removable wired pendant or from a stationary control panel on the side of the car.
Options
Secondary winch, automatic lubrication, alternative controls, flat car tie downs, bridge bars, wheel chocks.